Насосы гидроусилителя руля для легковых и грузовых автомобилей

Эти запчасти подходят к вашему автотранспортному средству? Узнайте прямо сейчас.

Car Truck Power Steering Pump Parts

A good power steering pump is designed to provide your vehicle with the kind of steering control it needs. Those who are interested in buying these steering components should understand how the pump works, how to inspect the shaft, and how to remove it.

What do power steering pumps do?

A power steering pump provides your power steering with the lubrication it needs to operate properly. These are installed in a variety of vehicle brands, including Ford, Honda, Chevrolet, and any other car with power-steering needs. Each of those power steering pumps has a similar design. When you turn your steering wheel shaft, the pump causes power-steering lubricant to flow into the wheels. This process helps to make your vehicle easier to steer and control on the road.

How do these pumps work?

When driving your car, the steering system detects when you are turning the wheel of your vehicle. It will gauge how quickly you are turning the steering wheel versus how quickly the wheels of the car are moving. It does this process very fast and tells the power-steering pump when to send this liquid and how much to send. As a result, there are many parts of a power steering pump to consider. For example, the sensor is the part that detects the force on the steering shaft. Valves and similar parts open and close to allow fluid into the system.

What dictates the type of part installed in a car?

The power steering pump that you add to your car will vary depending on the type of car you own. For example, a sedan will have a different power steering pump than a minivan. Thats because the size of the engines and their builds will vary. The main liquid exit part may be situated or attached to the steering wheel differently from vehicle to vehicle.

The brand of the car will also determine the pump. A Ford sedan is likely to have a slightly different pump build than a Chevy sedan. However, the basic design is likely to be similar. While it is possible to swap pumps between cars, it is often not a good idea. Be sure to check with the manufacturer before installing.

How do you replace a power steering pump?

When replacing a pump like this in any car, it is important to use appropriate wrenches. These will vary in size depending on the pump. Use a wrench set with bits that will fit the bolts. Then, you can remove the bolts using a power tool. Remove each bolt part slowly and evenly, slightly unscrewing one before the next.

Then, it is important to open the pump and drain all of the fluid into a container. This fluid must be disposed of with a mechanic or other type of power-steering pump expert. You must also remove the belts from the pulley and let them hang until you replace the pump.

Now, you can place the new power-steering pump in place. Make sure to put the belts on the pulley first to make it easier to install. You might need someone to hold the pump while you replace the bolts and all other components, such as the O-rings.